Thursday, March 26, 2020

Hi There Hop Stuff - CAS-ual Fridays Stamps!


Hi there!  Lisa here and I'm sharing another shaker similar to one I made for the Crafting of Hue Sponsorship Weekend so I could show you how I made this shaker using the paw die from the Huggable Critters die set!


I started by cutting the Bubble Box layer using the 2nd largest die in the set.  I taped it in place and then took the paw die from the Huggable Critters set and taped it in the bottom left corner so I could run them through together and avoid an extra run through the Gemini.  Then I took that piece and taped the paw die in place again and ran it through.  Then one more time so the paws were hopping across the bubblebox.  Once all three paws were cut out, I ran the entire thing through with a floral embossing folder.


Next I adhered acetate over the back of the die cut paws and added foam tape to create a well around the area I wanted to place my sequins and then additional tape to provide support for the Bubble Box layer.  I filled the well with sequins... using my fine tweezers to flip them over so when the shaker was right side up, most of the sequins would be too!


And finally I placed the design paper that I wanted to show through the shaker windows over the back.  I added adhesive to that and flipped the whole shaker element over onto my card front.


To finish it off, I used this cutie pie bunny from the Little Huggables set that I colored with my Copics.


And I added this cute sentiment also from the Little Huggables set... love all of the punny sentiments on this set!


A few sequins and done!

Thanks so much for stopping today!  Hope you enjoyed your visit and that you'll come back for more inspiration soon!  And should you need anything from the shop, I have this for you:





5 comments:

  1. OH dear me! This is such a CUTE card, I love the paw prints shaker element!

    ReplyDelete
  2. Awe.. look at that bunny hopping along to make a shaker card! :) So cute!

    Theresa

    ReplyDelete
  3. Super cute shaker, I love the texture you've added to the card with the embossing folder. Hugs, María.

    ReplyDelete
  4. So cute and I love the shaker element in it too.

    ReplyDelete

Thanks for your comments! They make my heart happy! Have a wonderful creative day!

This is a public blog, meaning any comments left will be visible by 3rd parties and 3rd parties may be able to access your information from your comment left here. I will not republish any content from this blog, but I am not responsible for republished content by 3rd parties. This is posted to be in compliance with the GDPR regulations