Beauty In The World - Rubbernecker Stamps

Hello there!  Lisa here and today I'm sharing this one using another one of the beautiful and uplifting sentiments from the shop!  And couldn't help but add the sweet Poppy Bouquet floral.

I knew I wanted to use this vintage rose design paper for this one and I loved the way the single roses in it were colored with dramatic shadows... so rather than carefully blending the petals, I tried to color them the same as the ones in the paper. 

I love the look I ended up with!  

And because I laid that beautiful sentiment over the floral, some of what I so carefully colored was covered up, so I snipped off portions that were hidden and stuck them underneath the main floral image.

I love the heritage look of this one!

Here's how I made it:

1. I cut a base from white card stock, 5 1/2 x 4 1/4".
2. I cut a piece of the wood grain Design Paper using the largest of the Nested Rectangle Small Stitch Dies.
3. Next the floral design paper was cut using the largest of the Nested Scallop With Holes.
4. I used the middle sized Nested Scallop With Holes to cut a piece of white cardstock.
5. The sentiment was stamped onto the white die cut with Memento Tuxedo Black Ink using my Misti.
6. I stamped the Poppy Bouquet using the same Memento Ink onto some Copic friendly paper and colored the image with Copic Markers R81, R83, R85, and R89 for the flowers and YG61, YG63 and YG67 for the foliage.
7. The image was cut using the Scan N Cut first, and then I trimmed it down further using scissors because I wanted to get into the nooks and crannies.
8. Finally I assembled all of my pieces using foam tape under the two scalloped layers, inserting the flowers between the two and strategically placing foam tape under the flowers in a few spots where they hang over those layers.
9. Lastly I added some sequins and was happy to find the gray pearls because of the vintage feel.

That's me for today!  Thanks so much for stopping today.  I hope you enjoyed your visit!  Be sure to come again soon for more Rubbernecker Stamps inspiration!

Here are links to all of the Rubbernecker Stamps products I've used today.  If you choose to shop using these links, I will receive a small compensation at no additional cost to you.  And thank you!

Be Strong - Rubbernecker Stamps

Welcome to some Rubbernecker Stamps inspiration!  Today I'm sharing a card made using the beautiful Poppy Bouquet stamp set except this time instead of eye popping red, I used some soft greens. 

I decided this Victorious sentiment was perfect to go along with it.  (Have I told you how much I love the sentiments available in the shop??)  And since some of the image was covered up by that big bold sentiment, I cut a piece off so I could have it popping out of the upper corner of it.

Here's how I put this one together:

1. I cut a white base 5 1/2" x 4 1/4".  For the second layer I cut a piece of colored cardstock to coordinate with my design paper 5 3/8" x 4 1/8".  Next I cut the design paper using the largest stitched rectangle and layered them all together.
2. I used the third and fourth largest frames from the OPC die together by nesting them upside down and adding foam tape to the back and popped it up in the center of my layered base.
3. I stamped, colored and cut out the Poppy Bouquet image using Copic Markers YG01, YG03, and YG17.  For the flowers I used the Blending Marker to soften the edges of my lightest color since I left a large part of the petals white.  I used a foam tape a little thicker than the one I used for the frame to pop the floral over the frame.
4. I stamped the sentiment using Memento Tuxedo Black onto white cardstock and trimmed the excess as closely to the sentiment as I could.  Once I decided where my sentiment would be popped up, I cut off part of the image, added the sentiment and inserted the cut leaf under the top right corner of the sentiment to extend the image a bit.
5. Just a few sequins finished it off.

Thanks so much for stopping by!  Hope you'll come again soon!

Below are links to the Rubbernecker Stamps products I've used today.  Should you decide to shop using these links I will receive a small compensation at no additional cost to you.  And thank you!

A Bouquet of Hugs With Rubbernecker Stamps

Excited to be up on the blog today and I'm sharing a shaker card I made using the Rectangle Combo One Piece Die #3 and the Lattice die.  You'll find step by step instructions and a list of Rubbernecker products I've used (with links) at the end of this post!

Isn't this Poppy Bouquet stamp beautiful!  I actually had planned on using a different sentiment with this image, but once I got the shaker put together I realized the sentiment I had in mind would take up too much real estate so I'll be sharing again soon with that one.  I opted instead for this beautiful Hugs die and decided on white so that it would not distract from those bright red poppies but used glitter paper because... well.. glitter!

I'm playing along over at Simon Says Stamp's Wednesday Challenge which is Fun With Florals.  You should check it out!

I love all of the white with that huge pop of color from the poppies.  Red Copics are tricky but I love them and they are definitely worth the trouble!  I always have cleanup to do when I get done coloring and do so with a combination of the Colorless Blender and a white gel pen...lol!  Always!  So don't be afraid... just do it!

If  you are interested, the reds I used are R27, R29, and R59 and the greens I used are YG01, YG03 and YG17.  These are two of my favorite combos.

Here's how I created the shaker:

• I started by cutting the Rectangle Combo One Piece Die #3 and the Lattice Die from white cardstock using an electronic die cutting machine.
• I decided how many of the frames I needed to make a window the right size for the Lattice die cut to fill in the center and laid them on my workspace upside down, nesting each frame inside the other.  Then so they would be easy to handle, I used scotch tape to adhere them together as one frame.
• Next, I added the Lattice die cut in the center and taped it down.
• I cut a piece of acetate slightly larger than the Lattice Window and adhered it over the back of the window using double sided adhesive.
• Finally to complete the shaker window panel, I added strips of foam tape to the back of the panel around the outside of the window, but close to it.  
• Since the window is a smaller space in the middle of the panel, I was left with a lot of space on the outer edges of the panel and so that my panel edges wouldn't bend downward I added a second line of foam tape around the outer edge just inside the scallop holes solely for structure.
• I cut a piece of white cardstock to 5 1/2" x 4 1/4".  I adhered a piece of wood grain design paper in the center of that big enough to fill the shaker window space.
• Now it was time to add the sequins!  It's always hard for me to decide how much to add.  You want enough that they show, but also want room to create that awesome shaker sound that makes my heart happy.  I lay the sequins down over center of the wood grain paper keeping them away from where I know my foam tape will be (I like to leave the protective layer on the foam tape of my top panel until I'm ready to cover the shaker so that I can easily hold it over the sequins without them sticking to the tape and eyeball whether I have enough sequins.)  Before I add the top layer, I like to turn over as many of the sequins as I can so they are not upside down in the shaker... I don't mind if I miss a few...but it makes me happy when the cup is up!
• Once you feel you have the right amount of sequins it's time to take the protective layer off of your foam tape and carefully place the window panel over the top.  I take a lot of time to be sure my window is straight because once it's down... it's down.  (Although between you and me, in desperate times, and because I'm pretty sure my head is crooked, I have cut away the bottom layer.. just the edges that show; added adhesive to the paper that's left, and attached that to a new base!  It does much less damage than trying to rip it off of the base)
• Once the shaker was together, the Poppy Bouquet image that I had stamped with my Misti, cut out with the Brother Scan N Cut and colored with Copics was added to the bottom left corner with foam tape.
• I cut the Hugs die once from glitter paper and two more times from plain white cardstock and stacked and glued the three layers together for dimension and added it to the card with glue on the side that would lay on my bouquet and some very thinly cut foam tape on the right side.
• All that was left to do was add a few sequins and I was done!

I've learned that different people put their shaker cards together in different ways and I've tried them but always come back to my Eyeball Method... crooked head and all it seems to work for me.. most of the time for most things...lol!

Thank you so much for stopping and I hope you enjoyed your stay!  Come back again soon and often for more inspiration!

Below are links to the Rubbernecker products I've used today.   Should you choose to shop using these links I will receive a small compensation at no additional cost to you.  And thank you!